MCC MIIC-203 Guide de l'utilisateur télécharger pdf (Page 37)

Basic Set Up Screen

5.1.3 Establish Adapter Communications Link

On the main screen, click the Open button to view the Set Up Screen. Three levels

of setup options are available, Basic, Advanced, and Diagnostic. Only Basic setup is

required.

5.1.3.1 Basic Setup

Use the “RS-232 Port Settings” control to select the RS-232 communication port

connected to the I

C adapter. Message Manager supports USB and network

connected local or remote RS-232 ports via the Windows Com driver.

Select from the list of available baud rates. Then click OK.

After a few moments, the Communication Events window on the Main Application

screen should report “I

C Open Successful.”

If open is not successful, follow the on-screen instructions. Make sure the

communications port is working, is enabled in the Windows Device Manager, and

is not being used by other software. Additional communication port open

information is available in the log file. See Diagnostic Setup options.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 70 71

Pas de commentaire

MCC MIIC-203 Guide de l'utilisateur Page 37