MCC MIIC-203 Guide de l'utilisateur télécharger pdf (Page 64)

Low Level Response: /XCC0000[CR]

Master read three bytes from slave address 0x4F. First two bytes are acknowledged

by master.

Command: /X S ~4f Rrr P [CR]

Response: /XCCA~xx~xx~xx[CR] ‘(xx = 00...FF)

Master transmit a Write WCR command to a Xicor X9241 at slave address 0x50.

WCR data is 0x00.

Command: /X S ~50 ~a0 ~00 P [CR]

Response: /XCCAAA[CR]

Master transmit a Write WCR command to a Xicor X9241 at slave address 0x50.

WCR data is 0x3f.

Command: /X S ~50 ~a0 ~3f P [CR]

Response: /XCCAAA[CR]

Issue a Read WCR command to a Xicor X9241 at slave address 0x50.

Command: /X S ~50 ~90 ~R P [CR]

Response: /XCCAA~xx[CR] ‘(xx = 00...FF)

Issue an Increment Wiper command to a Xicor X9241 at slave address 0x50.

Command: /X S ~50 ~20 1 P [CR]

Response: /XCCAA[CR]

Issue a Decrement Wiper command to a Xicor X9241 at slave address 0x50.

Command: /X S ~50 ~20 0 P [CR]

Response: /XCCAA[CR]

Display Tx bYte Count

Returns the number of bytes received by the slave device in the last master transmit

message.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 76 77

Pas de commentaire

MCC MIIC-203 Guide de l'utilisateur Page 64